20W Multi Color Laser System / PICO-20 Technical Parameters:
Power requirements: 110-240/50Hz (±5%)
Consumption: max. 1000VA
Total optical output: 22W
Laser module:Kvant
Laser Balance(R/G/B): 637nm-5000mW / 520nm-8000mW / 445nm-9000mW
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:CT-6215 Large 30Kpps Max.80Deg
Control:ILDA/DMX/AUTO-RUN/SD-CARD Playback/Moncha/Pangolin BEYOND/Pangolin Quickshow
Operation temperature: -20℃ to 45℃ (Temp. Control System)
Weight: 35kg
Size:530*370*260mm
Feature:
1.Pico series: laser module entirely manufactured in Europe.
2.Sufficient wattage.High power projector.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
9.America Cambridge Galvo Scanner system,CT-6215 Large 30Kpps.
10.Ideally suitable for mediun and large venues,outdoor laser shows.
Pico-20_Laser Show Projector_Pico Series
This Pico-20 is a high power as 20W RGB
laser show system, ILDA-AMP system pre-install inside, can up to
360,000 color output, due to unique temperature control design it can well function
from minus 20°C to plus 40°C.
This is a powerful multi color laser animation
system, has been widely used in various concert tours, great performances.
After a long time of practical applications, the stability of the system and
the delicate laser beam has been recognized by many professionals.
Its laser module is entirely manufactured
in Europe, has a higher quality beam effect,
more range and more brightness vibrant color. The measured the beam diameter at
long distance is only 30% of that of the conventional laser device. So that you
can get brighter laser beam and accurate mix-color in quite further.
Self-developed laser ILDA-AMP has been
pre-installed inside; it allows you to use longer ILDA signal lines to control,
interference and graphics jitter will not occur.
In 0-5V input drive signal, the laser
driver circuit can provide up to 100 kHz switching frequency. If the case of
each RGB color has 100 kHz modulation speed, in theory, you can get 360 000
color output.
Moncha.X has been built into the laser
light inside, you can use:
1.Standard TCP/IP network through the
Moncha laser control software to control
2.Through the DMX-512 signal to
control
3.Write the program through the Moncha
program to the SD card, so that the laser light into the automatic playback
mode.
4.Through the standard ILDA signal to
control
Suitable case:
The venues that need good quality and stable
laser device
Great show and concert, indoor and outdoor displays.
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
KNOW MORE ABOUT LASER SUPERCAN
This Pico-20 is a high power as 20W RGB laser show system, ILDA-AMP system pre-install inside, can up to 360,000 color output, due to unique temperature control design it can well function from minus 20°C to plus 40°C.
1.Standard TCP/IP network through the Moncha laser control software to control
Do not believe other websites false info; my company reserves the right to pursue legal action.
02.Aug 2018
