





6W Muilt Color Laser System / PICO-6 5Th Technical Parameters:
Power requirements: 90~240V / 50~60Hz
Consumption: Max.400VA
Total optical output: 6.3W
Laser module: 637nm-1300mW / 445nm-3000mW / 520nm-2000mW
Beam diameter: 5mm
Divergence: <0.8mrad
Blanking: 0-5V analog, up to 100kHz TTL
Scanner: DT-30 30Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation Temperature: -10℃ to 40℃
Dimensions: 300*360*183mm
Package Size: 540x540x370mm
Net Weight: 16kg
Feature:
1. Pico series: laser module entirely manufactured in Europe.
2. Self-developed laser ILDA-AMP has been pre-installed inside
3. Fully sealed optical section, IP67 waterproof seal power driver
4. Self-developed temperature control system,
5. The optical bench by suspension design
6. Controller pannel for brightness and X/Y size, Invert X/Y.
Thank you for attention PICO-6 Laser Show Projector.
Pico-6 5th is the newest version and flagship laser show projector of SUPER-CAN. Suitable to small and medium venues or rental.Major used in stage laser device.Its’ laser module entirely manufactured in Europe, for brighter more vibrant colors and longer lifetimes, give better beam effect compare with common laser projector.
Upgraded the Pico-6 5th, We make it smaller, and the greatly improve the radiating effect. In addition, We fix up the unique the handle system making the hanging any rotation angle. The fixed handle using in unique damping design, use it you can operate any rotation angle of projection in one hand.
Self-developed ILDA-AMP has been pre-installed. Allows to use longer ILDA signal cable to control Your laser. Interference and graphics jitter will not occur.
For the self-developed temperature control system, the projector can operate at minus 20 degrees to plus 40 degrees ambient temperature, and to have independent over-temperature protection, you no longer need to worry about delicate laser because of overheating and damage. The fan speed linear control by MCU, the projector will function in quite while in the normal temperature.You can ues it in a theather while the device will not influent the relaxed atmosphere.
Use it you can very fast to setup the Invert X or Y axis.
01.Aug 2018