Pico Series -Sky Beam Projector(Sky beam type)

Pico-20 PRO is a high power as20W RGB laser animation sky beam projector based on original Pico-20 type, ILDA-AMP system pre-install inside, can up to 360,000 color output, due to unique temperature control design it can well function from minus 20℃  to plus 40℃.
For consideration of contentment of various application of customers, we equip the waterproof and dustproof housing to make sure it can perfect function in outdoor venues such as roof of building or attraction.

 Landmark laser projector is used outdoor to make a certain point visible and exposed from a far distance. That term “sky laser projector” in Europe and Americasmore common.

 This is a powerful multi color laser animation system, has been widely used in various concert tours, great performances. After a long time of practical applications, the stability of the system and the delicate laser beam has been recognized by many professionals.

 Its laser module is entirely manufactured inEurope, has a higher quality beam effect, more range and more brightness vibrant color. The measured the beam diameter at long distance is only 30% of that of the conventional laser device. So that you can get brighter laser beam and accurate mix-color in quite further.

 Self-developed laser ILDA-AMP has been pre-installed inside; it allows you to use longer ILDA signal lines to control, interference and graphics jitter will not occur.

 In 0-5V input drive signal, the laser driver circuit can provide up to 100 kHz switching frequency. If the case of each RGB color has 100 kHz modulation speed, in theory, you can get 360 000 color output.

 Moncha.Lite has been built into the laser light inside, you can use:
1. Standard TCP/IP network through the Moncha laser control software to control

2. Through the DMX-512 signal to control

3. Write the program through the Moncha program to the SD card, so that the laser light into the automatic playback mode.

4. through the standard ILDA signal to control