15W Multi Color Laser System / PICO-15 Technical Parameters:
Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 450VA
Total optical output: 16W
Laser module:Kvant
Laser Balance(R/G/B):
4W/637nm
6W/520nm
6W/445nm
Beam diameter: 6.5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Galvo scanner system:CT6215 Large 30Kpps Max.80Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: -20℃ to 45℃ (Temp. Control System)
Weight: 35kg
Size:532*342*238mm
Feature:
1.Pico series: laser module entirely manufactured in Eurepo.
2.High quality laser module, unique design.
3.Black paint Stretching aluminum housing,downsize volume.
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
9.Galvo scanner system can upgrade(see overview below)
10.Ideally suitable for mediun and large venues,outdoor laser shows.
Pico-15 Laser Show Projector_Pico Series
Pico 15 is a 15W multi color laser show system, as laser module entirely manufactured inEurope,
which can give you a stunning laser effect, ideally suitable for various venues
and laser shows as well the outdoor laser displays.
Its’ all laser diodes module entirely manufactured in Europe, for brighter more vibrant colors and longer lifetimes, give better beam effect compare with common Chinese-made laser projector.
Upgraded the Pico-15 downsize the volume, the greatly improve the radiating effect. In addition, we fix up the unique the handle system making the hanging any rotation angle. The fixed handle using in unique damping design, use it you can operate any rotation angle of projection. Beside the fully sealed and IP67 waterproof section, it still can keep well function even in the harsh environment.
Self-developed laser ILDA-AMP has been pre-installed inside; it allows you to use longer ILDA signal lines to control, interference and graphics jitter will not occur.
For the self-developed temperature control system, the projector can operate at minus 20 degrees to plus 40 degrees ambient temperature, and to have independent over-temperature protection, you no longer need to worry about delicate laser because of overheating and damage. The fan speed linear control by MCU, the projector will function in quite while in the normal temperature.
Suitable venues:
Stable, high quality laser light device
needed indoor club
Medium and large theater and hotel, wedding
concert or laser showArea less than1000㎡,height below 12m,indoor or outdoor venues
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
READ THE CERFICATE AND PETENT
KNOW MORE ABOUT LASER SUPERCAN
02.Apr 2018
