9W Muilt Color Laser System / PICO-9 Technical Parameters:
Parameter:
Power requirements: 110-230V/50Hz (±5%)
Consumption: max. 350VA
Total optical output: 9W
Laser module:kvant
Laser Balance(R/G/B):
2W/637nm
3W/520nm
4W/445nm
Beam diameter: 5mm
Divergence: <0.8mrad
Modulation: 0-5V analog, up to 100kHz TTL
Scanner Set:DT-40 40Kpps Max.60Deg
Input connector: ILDA IN DB25 male
Output connector: ILDA OUT DB25 female
Operation temperature: -20℃ to 40℃ (Temp.Control System)
Size:462*307*263mm
Weight: 29kg
Feature:
1.Pico series: laser module entirely manufactured in Europe.
2.High quality laser module, unique design.
3.Black paint Stretching aluminum housing
4.Self-developed laser ILDA-AMP has been pre-installed inside
5.The optical bench by suspension design
6.ILDA Standard, also DMX or SD-card controlled
7.Individual controller for brightness and X/Y size, easy setup and use the X/Y mirror.
8.Self-developing handle design, use it for hanging in any rotation angle, or portable.
Pico-9_Laser Show Projector_Pico Series
Pico-9 9W RGB laser projector suitable for small, medium and large venues, as well outdoor laser displays, which is a high
quality laser show device and giving brilliant laser light effect.
Its laser module is entirely manufactured in Europe, has a higher quality beam effect, more range and more brightness vibrant color. The measured the beam diameter at 50m distance is only 30% of that of conventional laser device.
Self-developed laser ILDA-AMP has been pre-installed inside; it allows you to use longer ILDA signal lines to control, interference and graphics jitter will not occur.
For the self-developed temperature control system, the projector can operate at minus 20 degrees to plus 40 degrees ambient temperature, and to have independent over-temperature protection, you no longer need to worry about delicate laser because of overheating and damage. It pretty fit the needed quiet venues like theaters and concerts.
Design for ILDA Standard. But you also can control by DMX or SD-card player. You can use the potentiometer to adjust the Laser projector output brightness for each color and X/Y size. It have a very good design is the convert X/Y button.Use it you can very fast to setup the X or Y image mirror.
In 0-5V input drive signal, the laser driver circuit can provide up to 100 kHz switching frequency. If the case of each RGB color has 100 kHz modulation speed, in theory, you can get 360 000 color output.
Suitable Venues:
Small ,medium and large venues
Rental service and concerts
Wedding stage laser performance
Outdoor laser dispalys
ANNOUNCEMENT: This kinds of landmark laser projector is self-developed by Supercan CO.,LIT, which is the only official certificated productions in mainland China.
Do not believe other websites false info; my company reserves the right to pursue legal action.
READ THE CERFICATE AND PETENT
KNOW MORE ABOUT LASER SHOW
02.Apr 2018
